Autel MS906 Pro2-TS

Product details

When choosing the MS906 Pro2-TS

In this model, sensor type, TPMS service procedure, diagnostic coverage, license, and package contents are part of the same purchase decision.

• Integrated TPMS
• Sensor programming
• MS906 Family

Product details

What models is the MS906 Pro2-TS model compared to?

The MS906 Pro2-TS is compared to the DS900TS and the diagnostics-focused MS906 models. If TPMS intensity is low, non-TS models may be more suitable.

Product details

What is the Autel MS906 Pro2-TS model used for?

The MS906 Pro2-TS model uses tire pressure sensor ID, pressure, temperature, battery, and frequency data in its service functions. Its main uses and hardware features are: TPMS service, diagnostic tablet, and sensor programming.

For the MS906 Pro2-TS model, sensor reading, programming, and in-vehicle relearn support are determined by the current sensor and vehicle list.

• TPMS service
• Diagnostic tablet
• Sensor programming

Product Type

TPMS service tools

Usage level

Professional

Basic functions

TPMS service and Diagnostic tablet

Product details

What do the features of the MS906 Pro2-TS model provide in daily work?

When performing TPMS service with the MS906 Pro2-TS model, the sensor ID, frequency, and wheel position are recorded together. Sensor type indicates the sensor families the device can read or program. When performing diagnostic scanning with the MS906 Pro2-TS, the vehicle profile is selected, and the initial scan is recorded on supported control units.

Diagnostic results obtained with the MS906 Pro2-TS model are kept separate from the TPMS service record, which includes sensor ID and relearn steps. When programming sensors with the MS906 Pro2-TS, the appropriate programmable sensor family and frequency for the vehicle are selected.

After writing the new sensor ID, it is read again on the device screen; the in-vehicle relearn step is completed separately with physical installation. At the beginning of TPMS service performed with the MS906 Pro2-TS model, the sensor ID, frequency, and wheel position are recorded.

When programming or relearning is completed, the MS906 Pro2-TS model re-reads the sensor data and the warning status in the vehicle.

• Sensor type
• Relearn procedure
• Software package

Product details

Reading sensor ID and status with the MS906 Pro2-TS model

Before reading sensor ID and status with the MS906 Pro2-TS model, the vehicle, wheel position, and sensor frequency are recorded. The MS906 Pro2-TS is held at the correct distance from the sensor; ID, pressure, temperature, and accessible battery information are read together. For the MS906 Pro2-TS, frequency, sensor family, and vehicle record are matched.

For a sensor that cannot be read by the MS906 Pro2-TS, frequency, position, and physical status are checked separately. Once the initial sensor recording is complete, the MS906 Pro2-TS proceeds to the programming or relearn step.

• Record vehicle and tire position
• Read frequency with sensor ID
• Check pressure and battery information
• Save initial sensor report

Product details

Programming a compatible sensor with the MS906 Pro2-TS model

If programming is to be done with the MS906 Pro2-TS model, the compatible sensor family and vehicle record are selected. The old sensor ID is stored in the MS906 Pro2-TS service record; the copy or new ID creation method is written to the work order. For the MS906 Pro2-TS, the sensor family, frequency, and programming method are checked before the process begins.

The write result is verified by reading the new sensor again on the MS906 Pro2-TS screen. The programmed ID, wheel position, and sensor type are added to the MS906 Pro2-TS service report.

• Select compatible sensor family
• Save old ID
• Program new sensor
• Reread write result

Product details

Completing the in-vehicle relearn procedure with the MS906 Pro2-TS model

Before initiating in-vehicle relearn with the MS906 Pro2-TS model, the sensor ID of each wheel is checked. The MS906 Pro2-TS service note records which learning method (automatic, stationary, or OBD-based) was used. For the MS906 Pro2-TS, the vehicle, relearn method, and OBD connection requirement are checked before the process begins.

When the procedure is complete, the MS906 Pro2-TS re-reads the sensor data; the TPMS warning light in the vehicle is also checked. The necessary road test result is added to the MS906 Pro2-TS service report.

• Verify sensor identity for each tire
• Apply vehicle learning method
• Check TPMS warning light
• Perform road test if necessary

Product details

How to verify vehicle coverage for the MS906 Pro2-TS model?

For the MS906 Pro2-TS model, definitive compatibility cannot be stated without selecting the vehicle model, TPMS sensor type, frequency, and relearn method together. The Autel official coverage tool shows which systems, service functions, or protocols are enabled for the selected vehicle and control unit for the MS906 Pro2-TS.

The appearance of the brand line does not prove that active test, coding, programming, TPMS relearn, or gateway access is also enabled on the MS906 Pro2-TS.

Before ordering, prepare the VIN or full model information, model year, engine/chassis distinction, and the intended service for the MS906 Pro2-TS; also check the software version, license duration, VCI, adapter, and regional package.

• MS906 Pro2-TS model: prepare brand, model, model year, and engine/chassis information
• MS906 Pro2-TS model: select desired system and function separately; read, live data, active test, coding, or programming
• MS906 Pro2-TS model: verify ECU and function line in the official coverage tool
• MS906 Pro2-TS model: check VCI, cable, adapter, license, and regional package conditions
• MS906 Pro2-TS model: perform final check with VIN and manufacturer procedure before definitive service

Product details

MS906 Pro2-TS model TPMS features and compatibility information

Sensor type, relearn procedure, and software package determine the device's sensor and vehicle compatibility. In the use of the MS906 Pro2-TS model, sensor reading, programming, ID copying, and in-vehicle relearn are different procedures.

When performing TPMS service, diagnostic tablet, and sensor programming with the MS906 Pro2-TS, the sensor brand, frequency, and the learning method in the vehicle are handled separately. For the MS906 Pro2-TS model, the compatible sensor family and vehicle list are checked against the current manufacturer documentation.

A step requiring the main tablet, OBD connection, or an additional sensor is not considered a function performed solely by the MS906 Pro2-TS model device.

• Sensor type: Official technical documentation and product label for the MS906 Pro2-TS model are used as a basis
• Relearn procedure: Official technical documentation and product label for the MS906 Pro2-TS model are used as a basis
• Software package: The physical part and box contents delivered with the MS906 Pro2-TS model must match

Product details

How is the MS906 Pro2-TS model used in service?

When performing TPMS service with the MS906 Pro2-TS model, the vehicle, wheel position, sensor ID, and sensor type are written to the initial record. The device reads the sensor; if programming is required, the compatible sensor family is selected. If an in-vehicle relearn step is present, the vehicle manufacturer's procedure is followed in the same order as the MS906 Pro2-TS model menu.

In the MS906 Pro2-TS record, the new ID and read value of each wheel are kept separate. The software package is completed with the warning light and a short road test.

• Record vehicle, tire position, and sensor identity
• Verify sensor type information
• Perform read or programming operation with the MS906 Pro2-TS model
• Check warning light after relearning