THINKCAR TES402 and ES401 endoscope camera comparison
TES402 and ES401 are video endoscopes with independent displays that do the same job; TES402 6.2 mm probe, 100° view and 4.5 inch screen; Türkiye ES401 variant offers 6 mm probe and 5 inch screen. The selection is made based on input diameter, viewing width and screen ergonomics. This guide compares THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera models based on service work, connection condition, package and usage cost.
THINKCAR TES402 and ES401 endoscope camera comparison: technical comparison
THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera; The probe diameter and length, view and focus range are compared via display and recording articulating tip movement.
Comparison Criteria
THINKCAR TES402 Articulating-Tip Video Endoscope
THINKCAR ES401 Automotive Endoscope Camera
Product Type
Service - Service maintenance and measurement devices
Service - Service maintenance and measurement devices
Main Use
Visualization of cylinder, piston top and accessible combustion chamber surfaces / Pre-inspection of evaporator, HVAC housing, air duct and drain line
Preliminary inspection of engine cylinder and combustion chamber / Evaporator, HVAC box and drain line viewing
Probe diameter and length
Imaging cylinder, piston top and accessible combustion chamber surfaces / 6.2 mm camera probe
Preliminary inspection of engine cylinder and combustion chamber / probe with 6 mm articulating tip
View and focus range
Pre-inspection of evaporator, HVAC housing, air duct and drain line / Bi-directional 180° articulating-tip movement
Evaporator, HVAC box and drain line monitoring / Two-way 180° control
Screen and recording
Inspecting cooled exhaust, pipes, casings and closed mechanical spaces / 950 mm semi-rigid probe
Catalytic converter, exhaust and closed mechanical zone control / 1 meter metal hose
joint end movement
Creating visual evidence before disassembly with photo or video recording / 4.5-inch independent display
Engine-firewall gap, chassis gap and missing parts search / 5 inch independent screen
Initial Check
6.2 mm camera probe / Bi-directional 180° articulation movement
6 mm articulating tip probe / 180° control in two directions
Decision guide
Key differences between the products
When comparing the THINKCAR TES402 Articulating-Tip Video Endoscope and the THINKCAR ES401 Automotive Endoscope Camera, measurements of probe diameter and length, view and focus range, display and recording, and articulating tip movement are used. For in-cylinder pre-inspection, the work directly performed by the product is separated from the required main device or accessory. The main service tasks in the THINKCAR TES402 vs ES401 endoscope camera comparison are divided into imaging of the cylinder, piston top and accessible combustion chamber surfaces, and preliminary inspection of the engine cylinder and combustion chamber.
THINKCAR TES402 Articulating-Tip Video Endoscope is workshop type test, measurement or support equipment. Basic areas of use and equipment features include: imaging cylinder, piston top and accessible combustion chamber surfaces, preliminary inspection of evaporator, HVAC housing, air duct and drain line, inspection of cooled exhaust, pipes, casing and closed mechanical spaces, and visual findings before disassembly with photo or video recording. When comparing THINKCAR TES402 Articulating-Tip Video Endoscope, probe diameter and length are based on bidirectional 180° articulating-tip movement with a 6.2 mm camera probe.
THINKCAR ES401 Automotive Endoscope Camera is workshop type test, measurement or support equipment. Basic usage areas and hardware features are: preliminary inspection of the engine cylinder and combustion chamber, evaporator, HVAC box and drain line monitoring, catalytic converter, exhaust and closed mechanical area control and engine-firewall gap, chassis gap and lost parts search. When comparing the THINKCAR ES401 Automotive Endoscope Camera, the probe diameter and length are based on the 6 mm articulating tip probe and 180° control in two directions.
Decision guide
THINKCAR TES402 and ES401 endoscope camera specifications
Since THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera undertake different testing and support tasks, technical specifications are read according to the actual output of the product. In the THINKCAR TES402 and ES401 endoscope camera comparison, probe diameter and length, view and focus range, connection style and necessary accessories are based on official product information. In these products, the result is recorded with the measurement or physical test result specified by the manufacturer and the relevant measurement or physical test result format specified by the manufacturer.
Confirmed testing and connection information for the THINKCAR TES402 Articulating-Tip Video Endoscope are: Lens diameter: 6.2 mm; Orientation: Bi-directional 180°; Probe length: 950 mm. When using the THINKCAR TES402 Articulating-Tip Video Endoscope, the 6.2 mm camera probe, bidirectional 180° articulating-tip movement and necessary accessories are checked before the procedure. THINKCAR TES402 Articulating-Tip Video Endoscope result is interpreted only by the form of measurement, image, print or physical test specified by the manufacturer.
Verified testing and connection information for the THINKCAR ES401 Automotive Endoscope Camera is as follows: Probe diameter: 6.0 mm ± 0.45 mm; Orientation: 180° in both directions; Bending radius: 35 mm. When using the THINKCAR ES401 Automotive Endoscope Camera, the 6 mm articulating tip probe, 180° control in two directions and the necessary accessories are checked before the process. THINKCAR ES401 Automotive Endoscope Camera result is interpreted only by the form of measurement, image, print or physical test specified by the manufacturer.
Probe diameter and length
View and focus range
Screen and recording
joint end movement
Decision guide
Connection and package differences
Since THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera perform different physical service tasks, the box contents are not the same. The probe, clip, camera, hose, printer consumables, power cable and main device connection in the THINKCAR TES402 and ES401 endoscope camera comparison are only delivered if they are included in the packaging list of the relevant product. Joint end movement shows the effect of the additional main device or consumable requirement on the total cost in these service equipment.
In the THINKCAR TES402 Articulating-Tip Video Endoscope package, the probe, sensor, cable, charger or adapters supplied with the main product are shown separately. For the use of THINKCAR TES402 Articulating-Tip Video Endoscope, the contents of the box are controlled together with a 6.2 mm camera probe, bi-directional 180° articulating-tip movement, 950 mm semi-rigid probe and a 4.5 inch independent screen. If compatible host device or consumables are required, this requirement is stated separately from the THINKCAR TES402 Articulating-Tip Video Endoscope standard box contents.
In the THINKCAR ES401 Automotive Endoscope Camera package, the probes, sensors, cables, charging parts or adapters supplied with the main product are shown separately. For THINKCAR ES401 Automotive Endoscope Camera use, the contents of the box are controlled together with a 6 mm joint-ended probe, 180° control in two directions, 1 meter metal hose and a 5-inch independent screen. If compatible host device or consumables are required, this requirement is stated separately from the THINKCAR ES401 Automotive Endoscope Camera standard box contents.
Decision guide
THINKCAR TES402 and ES401 endoscope camera: maintenance, consumables and usage expenses
Usage costs for THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera vary depending on the work the device does. Within the scope of THINKCAR TES402 and ES401 endoscope camera comparison, consumables, probe or hose maintenance, power requirement, compatible main device and calibration need are evaluated separately. The probe diameter and length are taken as a basis to ensure that an unused accessory or measurement module does not increase the total cost.
THINKCAR TES402 Articulating-Tip Video Endoscope usage expense; It consists of consumables, maintenance, power connection and main device requirements, if any. For THINKCAR TES402 Articulating-Tip Video Endoscope, with 6.2 mm camera probe and bidirectional 180° articulating-tip movement, the probe diameter and length are examined before first use. If the THINKCAR TES402 Articulating-Tip Video Endoscope is common workshop equipment, a record of cleaning, storage and calibration, if any, is kept.
THINKCAR ES401 Automotive Endoscope Camera usage expense; It consists of consumables, maintenance, power connection and main device requirements, if any. THINKCAR ES401 Automotive Endoscope Camera with 6 mm articulating tip probe and 180° control in two directions, probe diameter and length are examined before first use. If the THINKCAR ES401 Automotive Endoscope Camera is common workshop equipment, a record of cleaning, storage and calibration, if any, is kept.
Comparison of diagnostic data with physical workshop measurements
Decision guide
Which product does what during in-cylinder pre-inspection?
For in-cylinder pre-inspection, the probe diameter and length, the required main device and the expected physical output are determined. The THINKCAR TES402 Articulating-Tip Video Endoscope and the THINKCAR ES401 Automotive Endoscope Camera do not do the same job during in-cylinder pre-inspection; The main tasks of the products are divided into imaging of the cylinder, piston crown and accessible combustion chamber surfaces and preliminary inspection of the engine cylinder and combustion chamber.
The in-cylinder preliminary control result is recorded in one of the measurement or physical test result formats specified by the manufacturer and the measurement or physical test result format specified by the manufacturer, depending on the relevant product.
THINKCAR TES402 Articulating-Tip Video Endoscope undertakes the task of imaging the cylinder, piston top and accessible combustion chamber surfaces during in-cylinder preliminary inspection; With the 6.2 mm camera probe, the probe diameter and length are checked before the procedure. With the THINKCAR TES402 Articulating-Tip Video Endoscope, the in-cylinder preliminary control result is recorded as the measurement or physical test result specified by the manufacturer.
THINKCAR ES401 Automotive Endoscope Camera undertakes the preliminary inspection task in the engine cylinder and combustion chamber during the in-cylinder preliminary inspection; With a 6 mm articulating tip probe, the probe diameter and length are checked before the procedure. With THINKCAR ES401 Automotive Endoscope Camera, the in-cylinder preliminary inspection result is recorded as the measurement or physical test result specified by the manufacturer.
Decision guide
Which product does what during evaporator and air duct inspection?
For evaporator and air duct inspection, the range of view and focus, the required host device, and the expected physical output are determined.
THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope The camera does not do the same job during evaporator and air duct inspection; The main tasks of the products are divided into imaging of the cylinder, piston crown and accessible combustion chamber surfaces and preliminary inspection of the engine cylinder and combustion chamber.
The result of evaporator and air duct inspection is recorded as the measurement or physical test result specified by the manufacturer, depending on the relevant product, and in one of the measurement or physical test result formats specified by the manufacturer.
THINKCAR TES402 Articulating-Tip Video Endoscope undertakes the task of imaging the cylinder, piston top and accessible combustion chamber surfaces during evaporator and air duct inspection; With bidirectional 180° articulating-tip movement, vision and focus range are checked before the procedure. The result of evaporator and air duct inspection with THINKCAR TES402 Articulating-Tip Video Endoscope is recorded as the measurement or physical test result specified by the manufacturer.
THINKCAR ES401 Automotive Endoscope Camera undertakes the preliminary inspection task in the engine cylinder and combustion chamber during evaporator and air duct inspection; With 180° control in two directions, the view and focus range are checked before operation. The result of evaporator and air duct inspection with THINKCAR ES401 Automotive Endoscope Camera is recorded as the measurement or physical test result specified by the manufacturer.
Decision guide
Which product does what during pipe and closed mechanical cavity imaging?
For pipe and closed mechanical cavity imaging, the display and recording, the required host device, and the expected physical output are determined.
THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera do not do the same job when imaging pipes and closed mechanical spaces; The main tasks of the products are divided into imaging of the cylinder, piston crown and accessible combustion chamber surfaces and preliminary inspection of the engine cylinder and combustion chamber.
The pipe and closed mechanical cavity imaging result is recorded in one of the measurement or physical test result specified by the manufacturer and one of the measurement or physical test result formats specified by the manufacturer, depending on the relevant product.
THINKCAR TES402 Articulating-Tip Video Endoscope takes on the task of imaging the cylinder, piston top and accessible combustion chamber surfaces during pipe and closed mechanical cavity imaging; The display and recording are checked before the process with a 950 mm semi-rigid probe. With the THINKCAR TES402 Articulating-Tip Video Endoscope, the pipe and closed mechanical cavity imaging result is recorded as the measurement or physical test result specified by the manufacturer.
THINKCAR ES401 Automotive Endoscope Camera undertakes preliminary inspection of the engine cylinder and combustion chamber while imaging the pipe and closed mechanical cavity; The display and recording are checked before the process with a 1 meter metal hose. With the THINKCAR ES401 Automotive Endoscope Camera, the pipe and closed mechanical cavity imaging result is recorded as the measurement or physical test result specified by the manufacturer.
Decision guide
THINKCAR TES402 and ES401 endoscope camera: which product is suitable for which job?
Auto shops and technicians who choose articulating tip cameras for visual inspection of engines, HVAC, piping or closed mechanical areas. THINKCAR TES402 vs ES401 endoscope camera comparison selection is based on the test to be performed, expected output, connection type and necessary accessories. If pipe and closed mechanical cavity imaging will be performed regularly, a device that directly performs this operation is selected.
Imaging the cylinder, piston crown and accessible combustion chamber surfaces and preliminary inspection of the engine cylinder and combustion chamber are different tasks and these products are not interchangeable.
THINKCAR TES402 Articulating-Tip Video Endoscope is suitable for auto services that pre-check the cylinder and piston surface through the spark plug or injector service opening, technicians who examine the visible condition in the evaporator, HVAC housing, air duct and drain line, and users who look for traces of falling parts or liquid in the rear of the engine, chassis gap, pipes and housing.
THINKCAR TES402 Articulating-Tip Video Endoscope is not suitable for those looking for OBD trouble code, live data, active testing or maintenance reset device and those who want to measure compression, pressure, sealing or electrical. The selection of THINKCAR TES402 Articulating-Tip Video Endoscope is based on the package delivered with a 6.2 mm camera probe, bidirectional 180° articulating-tip movement, probe diameter and length.
THINKCAR ES401 Automotive Endoscope Camera is suitable for services that want to make a preliminary visual inspection of the cylinder, piston and combustion chamber through the spark plug hole, technicians who inspect the evaporator and HVAC box through the cabin filter or service opening, and craftsmen who want to view the inside of the cooled exhaust and catalytic converter from the appropriate service point.
THINKCAR ES401 Automotive Endoscope Camera is not suitable for those looking for OBD fault code, live data, active testing or service reset device and those who want to perform medical imaging on human or animal. THINKCAR ES401 Automotive Endoscope Camera selection is based on the package delivered with a 6 mm articulating tip probe, 180° control in two directions, probe diameter and length.
Decision guide
THINKCAR TES402 and ES401 endoscope camera comparison: selection summary
The choice between the THINKCAR TES402 Articulating-Tip Video Endoscope and the THINKCAR ES401 Automotive Endoscope Camera starts with the actual service work the product does. For the THINKCAR TES402 and ES401 endoscope camera comparison, the probe diameter and length, viewing and focus range, display and recording as well as articulating tip movement, the required main device and the delivered package are examined together. Current sales status for THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera are displayed on the relevant product pages.
Frequently Asked Questions
Most frequently asked questions by customers
Which of the THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera models is suitable for which job?
The choice between THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera is made based on the service's vehicle profile, number of operations per day and criteria of probe diameter and length, view and focus range, display and recording, and articulating tip movement. If in-cylinder pre-checking is performed regularly, the required connection and function takes priority in this scenario.
Do the THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera offer the same functions in every vehicle or host device?
No. Functions on the THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera vary by product type, make, model, year, control unit, connectivity, and installed software package. For the THINKCAR TES402 and ES401 endoscope camera comparison, the models that communicate with the vehicle are checked from the manufacturer's current tool and function list, and the accessories are checked from the main device and connector information.
Do the THINKCAR TES402 Articulating-Tip Video Endoscope and the THINKCAR ES401 Automotive Endoscope Camera perform the same measurement or service task?
No. For THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera Probe diameter and length and connection type are read separately. The measurement, display, power supply or physical test result is recorded with its own unit and test condition.
Are all the parts in the package image of THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera included in the box?
Optional modules or different packages can be found in the same frame in the THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera manufacturer images. For each product in the THINKCAR TES402 vs ES401 endoscope camera comparison, the main device, VCI, cable, adapter, power part and carrying equipment to be delivered are specified in its own box contents list.
How do THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera update and license times compare?
For THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera, the included update period, renewal format, device account, serial number and account region are examined separately. THINKCAR TES402 and ES401 endoscope camera comparison page does not carry the campaign in another country to the Türkiye package; The current conditions of the purchased product are displayed on the relevant product page.
Where are the current prices of THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera shown?
THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera product and update prices are shown on their product pages according to package and sales status. THINKCAR TES402 vs ES401 endoscope camera comparison explains the device type, technical differences and package structure rather than fixing the former.
What sources are the THINKCAR TES402 and ES401 endoscope camera comparison technical information based on?
THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera specifications are taken from manufacturers' official product pages, catalogues, tool and function lists, and software documentation. THINKCAR TES402 vs ES401 endoscope camera comparison resources are listed in the technical resources section at the bottom of the page. A claim that is not found in the official source for THINKCAR TES402 Articulating-Tip Video Endoscope and THINKCAR ES401 Automotive Endoscope Camera will not be added to the technical table.
Automotive endoscope camera for visual inspection in cylinders, HVAC, exhaust, and enclosed vehicle areas, featuring a 6mm articulating probe with 180° two-way control and a 5-inch standalone display.
Preliminary inspection in engine cylinders and combustion chambers
Evaporator, HVAC box, and drain line imaging
Catalytic converter, exhaust, and enclosed mechanical area inspection
Self-contained video endoscope with a 4.5-inch screen, 6.2 mm camera probe and bi-directional 180° articulating-tip movement for visual inspection of engines, HVAC, pipes and closed mechanical areas.
View cylinder, piston crown and accessible combustion chamber surfaces
Pre-inspection of evaporator, HVAC housing, air duct and drain line
Inspect cooled exhaust, pipes, casings and closed mechanical spaces
THINKCAR TES402 Articulating-Tip Video Endoscope
THINKCAR ES401 Automotive Endoscope Camera
