Product information
What is the Launch BST-360 V2 for?
When selecting the Launch BST-360 V2, the compatible device, the service task to be performed, the operating range, and the package contents are checked.
Launch · Service maintenance and measurement devices
Launch BST-360 V2
Launch battery tester used for checking battery health, starting, and charging system via Bluetooth connection.
- Bluetooth
- Battery test
- Starting and charging analysis
≈ $1014,990 TL charged · VAT included · import duties excluded
In stockThe TRY price includes Turkish VAT. Import duties and local taxes are not included.View installment options2–6 installments
Accepted cards
The exact plan and total amount will be shown again at the payment step.
- Invoiced Product
- Authorized Dealer
- Guaranteed in Turkey
The Launch BST-360 V2 is a battery tester used by services that want to report battery health, starting system, and charging system status via Bluetooth connection.
View Launch productsWhat would you buy this for?
- Battery health check
- Starting and charging system analysis
- Services requiring Bluetooth reporting
Measurement and maintenance features
- 6V/12V coverage
- Bluetooth connection
- Reporting
Vehicle and part coverage
What vehicles is the Launch BST-360 V2 used on?
A make-model software list, as found in diagnostic devices, does not apply to this product. Compatibility is determined by the part to be measured, the electrical system, the operating range, the probe or connection method, and the manufacturer's safety limits.
- Vehicle make
- Evaluated not by brand, but by the product's technical measurement or service limit.
- Vehicle model
- Further evaluated if the system to be measured and connection condition are within the technical range.
- Technical limitation
- 6V/12V coverage, Bluetooth connection, Reporting
- Diagnostic Scope
- Does not include vehicle control unit software or make-specific service menus.
- Measurement range and safe connection conditions are verified from the product's official technical documentation.
Product details
What is the BST-360 V2 purchased for?
The BST-360 V2 is a battery testing equipment that complements the main diagnostic device. It reports battery, starting system, and charging system test results and transfers them to a compatible device via Bluetooth.
- Battery health report
- Starting system analysis
- Charging system check
Product details
Manufacturer technical information
Official Launch BST360 resources list Bluetooth battery testing, 6V/12V battery support, starting system and charging system analysis, and report sharing.
Product details
What does the BST-360 V2 model do?
The BST-360 V2 model is a Bluetooth-connected service tester that performs battery, starting system, and charging system tests as separate measurements. Its main uses and hardware features include: battery testing, starting system, and charging system.
The BST-360 V2 model performs its own testing or support tasks; it does not replace a full system diagnostic device.
- Battery test
- Starting system
- Charging system
- Product Type
- Service maintenance and measurement tools
- Usage level
- Specialty operation
- Basic functions
- Battery testing and Starting system
Product details
What are the benefits of the BST-360 V2 model features in daily work?
The BST-360 V2 model measures the general condition of the battery along with the terminal connection and selected battery type. The 6V/12V coverage information helps prevent errors caused by incorrect test types or poor clip contact. The BST-360 V2 model records the voltage drop during starting as a separate result from the battery test.
Bluetooth connection ensures accurate reading of starting time and minimum voltage value under correct operating conditions. The BST-360 V2 model displays the alternator output under idle and load conditions during charging system checks. Reporting information ensures that battery, starting, and charging results are kept together in the same report without confusion.
The BST-360 V2 model records battery, starting, and charging system results as separate tests. The reporting information is added to the service report along with the battery type, voltage, and test date.
- 6V/12V coverage
- Bluetooth connection
- Reporting
Product details
Testing the general condition of the battery with the BST-360 V2 model
Before performing a battery test with the BST-360 V2 model, the battery type, voltage, and condition of the terminals are checked. The clips are connected to ensure firm contact with the correct polarities. The appropriate battery test is selected on the device, and the result is recorded with the date and vehicle information.
Poor contact or incorrect battery type selection is indicated in the report. The battery result is evaluated separately from the starting and charging system tests.
- Check battery type and terminals
- Connect the clips to the correct polarity
- Run battery test
- Save the result with vehicle and date information
Product details
Examine voltage drop during cranking with the BST-360 V2 model
The BST-360 V2 model monitors the voltage drop at the initial start of the engine during a cranking test while preserving the battery connection. The vehicle is kept in a safe state before the test begins, and electrical consumers are adjusted according to the manufacturer's procedure. The minimum voltage value is displayed in the same record as the cranking time. The result is compared with the general battery health report.
If an out-of-range value is observed, the battery, starter motor, and connection losses are planned as separate checks.
- Start the cranking test while the vehicle is in a safe state
- Record the minimum voltage and cranking time
- Compare the result with the battery report
- Check connection losses separately
Product details
Check the charging system output with the BST-360 V2 model
During a charging system check, the BST-360 V2 model measures the alternator output while the engine is running. The values at idle and under the manufacturer's specified operating conditions are recorded. If necessary, electrical consumers are turned on, and the value under load is recorded separately. The charging result is displayed in a separate section from the battery and cranking tests.
At the end of the procedure, remove the clips by holding their bodies and add the report to the service record.
- Run the engine under the specified conditions
- Measure alternator output
- Record the value under load separately
- Remove clips safely
Product details
BST-360 V2 model technical specifications and operating limits
6V/12V coverage, Bluetooth connectivity, and reporting are distinct technical features. 6V and 12V battery coverage indicates the electrical system that can be tested; Bluetooth connectivity indicates how the result is transferred to a compatible device or application. Battery, cranking, and charging system tests are not the same measurements, and their results are recorded separately.
Results cannot be interpreted without entering battery type, polarity, and test conditions. Package contents are distinct from software or application requirements.
- 6V/12V coverage: The official technical documentation and product label for the BST-360 V2 model are used as a basis.
- Bluetooth connectivity: The physical parts and box contents delivered with the BST-360 V2 model must match.
- Reporting: The official technical documentation and product label for the BST-360 V2 model are used as a basis.
Product details
What are the comparable products for the BST-360 V2 model?
The BST-360 V2 model, Launch PFP-150, and Launch VSP-828 are not direct alternatives to each other. These three Launch products are not primary diagnostic tablets; they complete different physical service tasks such as power supply, imaging, and battery testing. The BST-360 V2 is used directly for battery testing tasks.
Supported battery voltage and type, battery-cranking-charging tests, and Bluetooth connectivity with reporting method are compared during selection. Launch PFP-150 and Launch VSP-828 cannot be used instead of the BST-360 V2 model as they perform different service jobs. First, the test to be performed and the safe operating limit are examined, followed by the connection method and box contents.
- Launch PFP-150: programming power support and battery supply
- Launch VSP-828: endoscope inspection and narrow area imaging
Product details
How is the BST-360 V2 model used in the service?
The use of the BST-360 V2 model begins with checking the battery voltage, type, and physical connection. The clips are connected to the correct polarity, and the necessary vehicle or battery information is entered. The battery, cranking, or charging test is run separately according to the need. The test condition and date of each result are recorded.
When removing the clips, do not pull on the cable, and add the report to the service record.
- Record the initial state for the battery test
- Prepare the 6V/12V coverage condition
- Perform the battery test procedure according to the manufacturer's instructions
- Recheck the post-operation result with the BST-360 V2 model
Related pages
Related content for Launch BST-360 V2
Service maintenance and measurement toolsExamine measurement and workshop equipment that complements diagnostic devices.Launch ProductsExamine Launch devices, accessories, and license products by their application areas.Launch PFP-150Compare the Launch PFP-150 model with the BST-360 V2 model in terms of programming power support, battery supply, and package structure.Launch VSP-828Compare the Launch VSP-828 model with the BST-360 V2 model in terms of endoscope inspection, narrow area imaging, and package structure.Launch PFP-150, VSP-828, and BST-360 V2 comparisonCompare Launch PFP-150, VSP-828, and BST-360 V2 products based on power support, video inspection, battery testing, connection, and daily workshop tasks.Service Measurement, Battery Testing, and BMS OperationsExamine the differences between physical measurement, fault diagnosis, and electronic reset.
Technical Resources
Technical resources for Launch BST-360 V2
Technical information verified with official sources on October 6, 2026.
FAQ
Frequently asked questions about Launch BST-360 V2
Is the BST-360 V2 model a standalone diagnostic device?
No. The BST-360 V2 model is an accessory, license, or service equipment that complements the main diagnostic device.
What specific tasks is the BST-360 V2 model used for?
The BST-360 V2 model is a Bluetooth-enabled service test device that performs battery, cranking, and charging system tests as separate measurements; it is used for direct battery testing in daily service. 6V/12V coverage, Bluetooth connectivity, and reporting are checked before the BST-360 V2 model is connected or a test is initiated.
Measurement, image, or physical test results are recorded according to the BST-360 V2 model's operating range.
Does the BST-360 V2 model use the same connection and operating range for every test?
No. For the BST-360 V2 model, battery voltage, battery type, test method, and compatible application or main device are checked. Battery, starting system, and charging system tests are separate procedures, and their results are recorded under their respective test conditions.
What steps are followed during the first use of the BST-360 V2 model?
During the first use of the BST-360 V2 model, the clips, 6V/12V coverage, Bluetooth connection, and reporting screen are checked. The clips are connected to the correct polarities. A general condition test is run on a known battery, and the result is recorded with the vehicle information.
Does the BST-360 V2 model require updates or licenses?
The BST-360 V2 model performs its physical function without its own software subscription; compatible main devices may require separate main device software for their modules. BST-360 V2 warranty and parts support are shown under the conditions of the purchased package.
An update period not related to this physical product for the BST-360 V2 model is not listed as a product feature.
What parts are included in the BST-360 V2 model package?
The BST-360 V2 model package separately lists the battery tester, battery connection clips, charging or carrying parts, and accessories listed by the manufacturer. 6V/12V coverage is a technical specification; it is not a physical part. The compatible application or main device required for reporting via Bluetooth is specified separately.
Upon delivery, check the clips, cables, and device body. Updates are included in the commercial terms only if the product's own software is available.
Is the BST-360 V2 model suitable for professional service?
The BST-360 V2 model can be used in workshops performing battery testing, starting system, and charging system tasks. The 6V/12V coverage, physical connection, and package contents must align with the workflow. The product does not replace fault detection, programming, or measurement operations outside its scope of duty.
Comparison
Similar models to Launch BST-360 V2
Compare products in the same class with information on usage level, service tasks, and price.
| Model | Level | Usage | Price | View |
|---|---|---|---|---|
| Launch BST-360 V2Launch | Specialty operation |
| ≈ $1014,990 TL charged · VAT included · import duties excluded | View |
| Launch PFP-150Launch | Specialty operation |
| ≈ $1,21259,900 TL charged · VAT included · import duties excluded | View |
| Launch VSP-828Launch | Specialty operation |
| ≈ $36217,900 TL charged · VAT included · import duties excluded | View |
| ANCEL BST600 12V/24V Battery Tester with PrinterAncel | Service |
| ≈ $1728,490 TL charged · VAT included · import duties excluded | View |
Similar products
Similar devices
Launch PFP-150
150A Launch power supply used to stably supply the vehicle battery during ECU programming and flashing operations.
- Programming power support
- Battery supply
- Workshop equipment
≈ $1,21259,900 TL charged · VAT included · import duties excludedIn stock
Launch VSP-828
Launch endoscope/video scope accessory used for viewing tight and curved areas.
- Endoscope inspection
- Tight area viewing
- Service inspection
≈ $36217,900 TL charged · VAT included · import duties excludedIn stock
ANCEL BST600 12V/24V Battery Tester with Printer
A service-type battery tester that checks battery status, starting, and charging systems in 12V and 24V lead-acid starter batteries, and provides results from its built-in thermal printer.
- 12V/24V battery test
- Starting system check
- Charging system check
≈ $1728,490 TL charged · VAT included · import duties excludedOut of stock
View
Autel MaxiBAS BT609
A MaxiBAS solution featuring a 7-inch Android tablet, wireless battery analysis, battery registration, electrical system diagnostics, and a service menu.
- Battery health test
- Cranking and charging test
- Battery registration
≈ $68633,900 TL charged · VAT included · import duties excludedOut of stock
View