OEM | Vehicle coding and ECU programming devices
KESS V2 Master 5.017 is an OEM production Euro Clone, Red Board ECU programming device used for reading and writing via OBD on supported ECU protocols. It is not the current official Alientech KESS3.
The exact plan and total amount will be shown again at the payment step.
Have the vehicle, model year, engine, and ECU information ready before ordering. KESS V2 support is evaluated only for ECUs and operation methods found in the current protocol list.
Product information
KESS V2 Master 5.017 is an OEM production Euro Clone device used for reading and writing via the OBD connection on supported engine control units. This product is not KESS3 or current original Alientech hardware.
Device selection should not be based on vehicle name alone; the full ECU identity, protocol, software version, and the intended operation must be checked together.
Vehicle Coverage
The make name alone does not guarantee compatibility. Within the same make, model year, engine, chassis, control unit, communication protocol, and intended operation can yield different support results.
Product details
The variant on sale is a Master class OEM/Euro Clone device equipped with 5.017. It is the red board variant known in the market as Red Board. The product title uses the simple model name; the clone/OEM status is clearly stated in the description to avoid confusion with the original product.
Alientech's official support conditions list the KESSv2 model among discontinued products whose production and updates have ended. Therefore, the product on this page is not presented as a current official KESS3 solution.
Product details
KESS V2 is used to communicate with supported ECUs via the OBD socket, based on the current device software and protocol list. According to the support line, ECU ID reading, backing up the existing file, and writing the appropriate file can be performed.
The device does not prepare the calibration file on its own and does not indicate that all ECU variants for a single vehicle year are supported.
Product details
The delivered device and legal software package are checked on a Windows computer; driver recognition, USB connection, and device power-on are verified. Otobiltek does not provide third-party accounts, license cracking, or software from unverified sources.
Completion of installation does not mean that a specific vehicle or ECU is supported; protocol and ECU checks are performed separately before the first operation.
Product details
Voltage or connection interruption during writing can cause the ECU to malfunction. Stable power support should be used in accordance with the vehicle manufacturer's procedure, the existing file should be saved without modification, and the ECU ID and target file match should be checked twice.
The computer going into sleep mode, USB connection being interrupted, or the ignition being turned on/off randomly should be prevented while the operation is in progress.
Product details
KESS V2 is primarily used for OBD connection on the vehicle. KTAG, on the other hand, is for bench work on a removed ECU. For the same ECU, the memory area or processing method accessible by the two devices may differ. The choice is made based on the current protocol line and the task to be performed, not the device name.
Product details
Before reading the ECU ID via OBD on the vehicle with the KESS V2 Master ECU Programming and Chip Tuning model, the ECU label, part number, and processor information (if any) are recorded. Full ECU and protocol compatibility is verified with the HW 5.017 Master variant within the same protocol record.
The connection diagram is opened; pins and supply voltage are measured. The first step is only to read the ECU ID. File operations are not initiated without adding the read ID to the work order.
Product details
The KESS V2 Master ECU Programming and Chip Tuning model connection is prepared according to the OBD, Bench, Boot, or BDM method in the current protocol instruction. Full ECU and protocol compatibility is matched with the stable power and file backup using the device and cable set.
Power supply and computer sleep settings are checked. The first successful read is stored in two separate locations without modification. The process does not proceed without verifying the backup size and ID.
Product details
If writing is to be done with the KESS V2 Master ECU Programming and Chip Tuning model, the target file is compared with the exact ECU ID and the current software record. Stable power and file backup with OEM/Euro Clone product ID are re-checked before the operation begins.
Power and USB connection are maintained uninterrupted throughout the writing process. The software completion notification is recorded. Then, the ECU is re-identified and communication is checked.
Product details
After the KESS V2 Master ECU Programming and Chip Tuning model operation, the initial ID, the connection method used, and the writing result are kept in the same service record. The OEM/Euro Clone product ID and HW 5.017 Master variant are re-evaluated in the final check. ECU error or communication status is read.
Basic operation check on the vehicle is completed according to the manufacturer's procedure. The unmodified original backup is preserved for return.
Product details
Definitive compatibility cannot be stated for the KESS V2 Master ECU Programming and Chip Tuning model without selecting the vehicle make, model, year, engine, control unit, and the intended operation together.
The valid coverage for the KESS V2 Master ECU Programming and Chip Tuning model is checked via the exact ECU ID and connection method in the protocol list of the delivered device.
Simply seeing the vehicle make or model in the list when evaluating the KESS V2 Master ECU Programming and Chip Tuning model does not prove that reading, writing, cloning, or any other operation is supported.
Before ordering, prepare the VIN or exact model information, model year, engine/chassis distinction, and the intended operation for the KESS V2 Master ECU Programming and Chip Tuning model; software version, license duration, VCI, adapter, and regional package should also be checked.
Product details
The HW 5.017 Master variant, full ECU and protocol compatibility, stable power, and file backup with OEM/Euro Clone product ID determine which ECU and connection method the device will be used with.
When performing OBD reading on supported ECUs, obtaining an original file backup, writing ECUs based on protocol, and checking ECU ID and connection with the KESS V2 Master ECU Programming and Chip Tuning model, the ECU label, processor or control unit family, protocol, cable or adapter, and stable power conditions are verified together.
Reading, writing, cloning, and checksum are not the same operations; only the step explicitly supported in the current technical documentation should be applied.
Product details
Work with the KESS V2 Master ECU Programming and Chip Tuning model begins with writing the work order for a request to read supported ECUs with their full ECU ID. The technician verifies the HW 5.017 Master variant condition, protocol, connection diagram, and power support. The first successful read is stored in two separate locations without modification.
If writing is required, the target file is matched with the ECU ID, and the connection is maintained throughout the operation. In the final check, ECU communication, writing result, and the unmodified original backup are shown in the same service record.
Product details
The main device, cables, adapters, and any software or license conditions in the KESS V2 Master ECU Programming and Chip Tuning model package are listed separately. The HW 5.017 Master variant, full ECU and protocol compatibility, stable power, and file backup must match the delivered physical parts.
Parts shown in the product image but not listed by name and quantity in the box list are not considered part of the standard package. Software access, technical support, and hardware warranty are separate conditions.
Post-initial setup support
The initial installation of the device purchased from Otobiltek is free. The following paid service is for subsequent re-installations and for users who purchased their device from another seller. The service is provided remotely; it does not include the physical product, software license, or shipping.
Remote installation support covers Windows, USB driver, device recognition, and initial power-on check.
≈ $612,990 TL charged · VAT included · import duties excludedRelated pages
Technical Resources
Technical information checked with official sources on October 10, 2026.
FAQ
No. The product on sale is the KESS V2 5.017 Master OEM/Euro Clone Red Board variant; it is not the current original Alientech KESS3.
Yes. Driver, USB, and initial startup check on a Windows computer for the delivered device are included in the free initial setup support.
Yes. A separate KESS V2 remote setup service can be purchased for devices bought from other sellers and for subsequent re-installations.
No. Support is not based on vehicle name; it is checked based on ECU model, protocol, software version, and operation method.
Software packages with unverified source or distribution authority are not published on the page. Installation is supported via the legal software package of the delivered device.
The ECU identity must be verified, the original file must be backed up, and uninterrupted power must be provided for the vehicle and computer.
The KESS V2 Master ECU Programming and Chip Tuning model is an ECU programming device used for reading ECU IDs on supported ECUs, obtaining original file backups, writing ECUs based on protocol, and checking ECU ID and connection on supported control units.
The HW 5.017 Master variant, full ECU and protocol compatibility, stable power, and file backup with OEM/Euro Clone product ID indicate which ECU, connection, and operation flow will be used. Full system fault scanning and ECU file operations are distinct tasks.
No. The vehicle and operation coverage on the KESS V2 Master ECU Programming and Chip Tuning model is determined by make, model, year, control unit, and the installed software package. The manufacturer's official vehicle and function list is the basis for the KESS V2 Master ECU Programming and Chip Tuning model.
The list shows the functions of the KESS V2 Master ECU Programming and Chip Tuning model on a vehicle and control unit basis.
Comparison
Compare products in the same class with information on usage level, service tasks, and price.
| Model | Level | Usage | Price | View |
|---|---|---|---|---|
| KESS V2 Master ECU Programming and Chip Tuning DeviceOEM | Professional |
| ≈ $2029,990 TL charged · VAT included · import duties excluded | View |
| KESS V2 Installation and Remote Support ServiceOtobiltek | Specialty operation |
| ≈ $612,990 TL charged · VAT included · import duties excluded | View |
| KTAG Master ECU Programming and Chip Tuning DeviceOEM | Professional |
| ≈ $2029,990 TL charged · VAT included · import duties excluded | View |
| CGDI FC200 ECU Programming and Chip Tuning DeviceCGDI | Professional |
| Out of stock | View |
Similar products
This is a remote technical support service for the KESS V2 5.017 device, covering Windows, USB driver, device recognition, and initial startup check; it does not include a physical product or software license.
KTAG Master 7.020 is an OEM production Euro Clone, Red Board ECU programming device used for reading and writing via bench connection on supported ECUs. It is not the current official Alientech product.
CGDI FC200 is a professional programming device developed for reading, writing, and cloning via OBD, Bench, and Boot on supported ECU and EGS modules; it also features Bosch ECU search, online checksum, and specific BMW ISN operations.