This product is currently out of stock. You can review available alternatives in the product list.
Last recorded price: ≈ $68633,900 TL charged · VAT included · import duties excluded
Autel Service maintenance and measurement devices
Autel MaxiBAS BT609
A MaxiBAS solution featuring a 7-inch Android tablet, wireless battery analysis, battery registration, electrical system diagnostics, and a service menu.
- Battery health test
- Cranking and charging test
- Battery registration
- Electrical system diagnostics
Alternatives available for saleRecommended models instead of Autel MaxiBAS BT609
Main recommendationAutel MaxiBAS BT608
Features a 5.5-inch touchscreen, 100–3000 CCA battery testing, battery registration, electrical system analysis, and a built-in thermal printer.
28,900 TLReview Autel MaxiBAS BT608
Strong alternativeANCEL BST600 12V/24V Battery Tester with Printer
A service-type battery tester that checks battery status, starting, and charging systems in 12V and 24V lead-acid starter batteries, and provides results from its built-in thermal printer.
Product information
What is the Autel MaxiBAS BT609 used for?
The MaxiBAS BT609 combines battery health testing, starting and charging system analysis, battery registration, electrical system diagnostics, and basic service functions on a 7-inch tablet.
What would you buy this for?
- Workshops with heavy battery and electrical system business
- Workshops that perform registration after battery replacement
- Technicians who share test reports via Wi-Fi
Measurement and maintenance features
- 100–3000 CCA range
- Battery type and standard
- Annual update condition
Vehicle and part coverage
Which vehicles can the Autel MaxiBAS BT609 be used on?
A make-model software list, as found in diagnostic devices, does not apply to this product. Compatibility is determined by the part to be measured, the electrical system, the operating range, the probe or connection method, and the manufacturer's safety limits.
- Vehicle make
- Evaluated not by brand, but by the product's technical measurement or service limit.
- Vehicle model
- Further evaluated if the system to be measured and connection condition are within the technical range.
- Technical limitation
- 100–3000 CCA range, Battery type and standard, Annual update condition
- Diagnostic Scope
- Does not include vehicle control unit software or make-specific service menus.
- Measurement range and safe connection conditions are verified from the product's official technical documentation.
Product details
What tests does the BT609 perform?
Autel lists 12V battery testing (in-vehicle and out-of-vehicle) with a 100–3000 CCA range, 12V starting/charging system checks, and support for Flooded, AGM, AGM Spiral, EFB, and GEL batteries for the BT609. AutoVIN and barcode reading accelerate vehicle-battery information retrieval.
Battery registration, electrical system diagnostics, reading/clearing fault codes in current vehicle systems, and the maintenance menu are functions beyond the device's battery testing capabilities.
- 7-inch 1280 × 800 display
- 2 GB RAM and 64 GB storage
- 5,800 mAh battery
- 100–3000 CCA battery test
Product details
Reporting and printer difference
The BT609 shares reports via Wi-Fi or sends them to a compatible network printer; it does not have a built-in thermal printer in the device body. If instant paper printouts are needed at the workbench, the BT608's built-in printer offers a distinct advantage. A BTAK multimeter and current clamp set are also not included in the standard package.
- Screen
- 7-inch, 1280 × 800
- Memory
- 2 GB RAM / 64 GB storage
- Battery
- 12 V, 100–3000 CCA
- System test
- 12 V starting and charging
- Printer
- Not built-in; Wi-Fi sharing/printing
Product details
Which models is the MaxiBAS BT609 model compared to?
The BT609 is compared to the BT608 for those wanting a built-in printer, and to the BT506 and BT508 for more basic testing without a screen requirement. The BT609's larger screen and service menu are aimed at workshops that want to perform battery testing and vehicle diagnostics on the same tablet.
Product details
What is the MaxiBAS BT609 model used for?
The MaxiBAS BT609 model performs physical measurement or auxiliary service tasks within its own connection and operating range. Its main applications and hardware features include battery health testing, starting and charging system testing, battery registration, and electrical system diagnostics.
The MaxiBAS BT609 model performs its own testing or support tasks; it does not replace a full system diagnostic device.
- Battery health test
- Cranking and charging test
- Battery registration
- Electrical system diagnostics
- Product Type
- Service maintenance and measurement tools
- Usage level
- Professional
- Basic functions
- Battery Health Test and Starting and Charging System Test
Product details
What do the MaxiBAS BT609 model features provide in daily work?
When performing battery health testing with the MaxiBAS BT609 model, the 100–3000 CCA range determines the physical connection or measurement condition. The initial result is recorded along with the unit and test point. When performing starting and charging system testing with the MaxiBAS BT609, the battery type and standard determine the physical connection or measurement condition.
When performing battery registration with the MaxiBAS BT609 model, the annual update condition determines the physical connection or measurement condition. When performing electrical system diagnostics with the MaxiBAS BT609, the 100–3000 CCA range determines the physical connection or measurement condition. The initial result obtained with the MaxiBAS BT609 model is recorded with the test point and operating condition.
The annual update condition is recorded a second time under the same condition and added to the service form.
- 100–3000 CCA range
- Battery type and standard
- Annual update condition
Product details
Record the health and capacity result of a 12 V battery with the MaxiBAS BT609 model
Before starting a 12 V battery test with the MaxiBAS BT609 model, select the battery type, label standard, and CCA value. Connect the B200 test module clamps with correct polarity to clean terminal surfaces. Record the health, charge status, and capacity result along with vehicle and battery information.
If a low result is obtained, check the connection surface and charge level, then repeat the test. Initial and verification results are stored in the same service report.
- Select battery type and CCA value
- Connect B200 clamps with correct polarity
- Run health test
- Record initial and verification results
Product details
Separately test the starting and charging system with the MaxiBAS BT609 model
The MaxiBAS BT609 model maintains the battery connection during starting and charging system inspection and initiates each test separately. Record the lowest voltage during cranking and the operating time; record charging voltage and load status while the engine is running. Results are evaluated under separate headings from the battery health test.
If out-of-range values are observed, the process is divided into separate control steps for connection loss, battery, starter motor, and alternator.
- Run starting test separately
- Record minimum voltage
- Measure charging system under load
- Report results under separate headings
Product details
Re-check the electrical system after battery registration with the MaxiBAS BT609 model
During new battery registration with the MaxiBAS BT609 model, the AutoVIN result is compared with the physical vehicle, and the type and capacity of the installed battery are verified. Read the old battery information in the supported BMS menu and complete the new battery registration according to the vehicle manufacturer's procedure. After the process, rescan the relevant system.
The registration result, date, and the label of the installed battery are added to the service form.
- Match AutoVIN result with vehicle
- Verify new battery information
- Complete BMS registration process
- Rescan system and save result
Product details
How is the MaxiBAS BT609 model used in the workshop?
Usage of the MaxiBAS BT609 model begins by determining the test point and operating condition. Establish the physical connection according to the product procedure. Record the initial result with its unit. After the process, perform a second check under the same condition. Disconnect the connections in a safe sequence and write the result to the service form.
- Record initial status for battery health test
- Prepare 100–3000 CCA range condition
- Apply battery health test procedure according to manufacturer's instructions
- Re-check result after operation with the MaxiBAS BT609 model
Related pages
Related content for Autel MaxiBAS BT609
Autel MaxiBAS BT608Compare the Autel MaxiBAS BT609 model with the Autel MaxiBAS BT608 model in terms of battery health testing, starting and charging system testing, and package structure.ANCEL BST600 12V/24V Battery Tester with PrinterCompare the MaxiBAS BT609 model with the ANCEL BST600 12V/24V Printer Battery Tester model in terms of 12V/24V battery testing, starting system check, and package structure.Launch BST-360 V2Compare the MaxiBAS BT609 model with the Launch BST-360 V2 model in terms of battery testing, starting system, and package structure.Think Easy Battery Test ClipCompare the MaxiBAS BT609 model with the Think Easy Battery Test Clip model in terms of battery testing, voltage check, and package structure.Autel BT608, BT609, ANCEL BST600, Launch BST-360 V2, and Think Easy comparisonCompare Autel BT608, BT609, ANCEL BST600, Launch BST-360 V2, and Think Easy battery test equipment based on 6V/12V/24V coverage, connection, and reporting.Service Measurement, Battery Testing, and BMS OperationsExamine the differences between physical measurement, fault diagnosis, and electronic reset.Autel ProductsExamine Autel devices, accessories, and software products according to their usage areas.
Technical Resources
Technical resources for Autel MaxiBAS BT609
Technical information verified with official sources on October 14, 2026.
FAQ
Frequently asked questions about MaxiBAS BT609
Does the MaxiBAS BT609 model cover every vehicle the same way?
No. The coverage of the MaxiBAS BT609 model varies depending on the vehicle make, model, year, control unit, software package, and the operation to be performed.
Does the BT609 perform battery registration?
Yes, it has a new battery registration function for supported vehicles. The scope of the operation depends on the make, model, year, and battery management system.
Does the BT609 have a built-in printer?
No. Reports are shared via Wi-Fi or sent to a compatible printer; the built-in thermal printer is available on the BT608 model.
What specific tasks is the MaxiBAS BT609 model used for?
The MaxiBAS BT609 model performs physical measurement or auxiliary service tasks within its own connection and operating range; it is used for direct battery health testing in daily service.
The 100–3000 CCA range, battery type and standard, and annual update condition are checked before connecting the MaxiBAS BT609 model or initiating a test. Measurement, display, or physical test results are recorded according to the MaxiBAS BT609 model's operating range.
Does the MaxiBAS BT609 model use the same connection and operating range for every test?
No. For the MaxiBAS BT609 model, the physical connection, measurement type, and operating range are checked together. The result is written to the same service record along with the test point and operating condition used.
What steps are followed for the first use of the MaxiBAS BT609 model?
For the first use of the MaxiBAS BT609 model, physical connections, the 100–3000 CCA range, and the operating range are checked. The test point is prepared. The battery health test result is recorded along with the unit and operating condition.
Does the MaxiBAS BT609 model require updates or a license?
The MaxiBAS BT609 model performs its physical tasks without its own software subscription; main device software may be required for modules operating with a compatible main device. MaxiBAS BT609 warranty and parts support are indicated in the conditions of the purchased package.
This product feature is not written for a physical product for the MaxiBAS BT609 model.
Comparison
Similar models to Autel MaxiBAS BT609
Compare products in the same class with information on usage level, service tasks, and price.
| Model | Level | Usage | Price | View |
|---|---|---|---|---|
| Autel MaxiBAS BT609Autel | Professional |
| ≈ $68633,900 TL charged · VAT included · import duties excluded | View |
| Autel MaxiBAS BT608Autel | Service |
| ≈ $58528,900 TL charged · VAT included · import duties excluded | View |
| ANCEL BST600 12V/24V Battery Tester with PrinterAncel | Service |
| ≈ $1728,490 TL charged · VAT included · import duties excluded | View |
| Launch PFP-150Launch | Specialty operation |
| ≈ $1,21259,900 TL charged · VAT included · import duties excluded | View |
Similar products
Similar devices
Autel MaxiBAS BT608
Features a 5.5-inch touchscreen, 100–3000 CCA battery testing, battery registration, electrical system analysis, and a built-in thermal printer.
- Battery health test
- Cranking and charging test
- Battery registration
≈ $58528,900 TL charged · VAT included · import duties excludedOut of stock
View
ANCEL BST600 12V/24V Battery Tester with Printer
A service-type battery tester that checks battery status, starting, and charging systems in 12V and 24V lead-acid starter batteries, and provides results from its built-in thermal printer.
- 12V/24V battery test
- Starting system check
- Charging system check
≈ $1728,490 TL charged · VAT included · import duties excludedOut of stock
View
Launch PFP-150
150A Launch power supply used to stably supply the vehicle battery during ECU programming and flashing operations.
- Programming power support
- Battery supply
- Workshop equipment
≈ $1,21259,900 TL charged · VAT included · import duties excludedIn stock
Launch VSP-828
Launch endoscope/video scope accessory used for viewing tight and curved areas.
- Endoscope inspection
- Tight area viewing
- Service inspection
≈ $36217,900 TL charged · VAT included · import duties excludedIn stock